| YNQ1205/YNQ1210/YNQ1215/YNQ1205A/YNQ1210A/YNQ1215A |
|
Main Characteristics:
1. The serial inversion power supply can convert DC low-voltage power supply into 100V-300V AC or DC power supply
2. Volume is small, weight is light, and conversion efficiency is high.
3. Have functions of input under-voltage protection and input over-voltage protection
4. Apply to DC-AC and DC-DC with low power (such as energy-saving lamp, emergency light and so on)
|
|
Main Technical Indexes
|
Product Name |
Inversion Power Supply |
|
Dimension and Weight |
|
|
Power Supply |
|
|
|
1. DC input rated capacity: 60/120/180/60/120/180VA
2. DC input rated voltage: 12/12VDC
3. DC input rated current: 5/10/15/5/10/15A
4. DC voltage allowable range of DC input: 10~14/10~14VDC
5. DC input no-load current: 0.3A
6. AC output rated power: 50/100/150/50/100/150W
7. AC output rated voltage and wave form: 100V-300V (square wave )/100V-300V (DC)
8. AC output rated current: 0.25/0.5/0.75/0.25/0.5/0.75A
9. AC output voltage precision: 220¡À5%
10. Dynamic response (Load 0¡û¡ú100%): ¡Ü5%
11. Power factor: ¡Ý0.85
12. Overload capacity: 150%, 10sec.
13. Inversion efficiency (75% of resitive load): 90%/90%
14. Insulating strength (input and output): 1500VAC
15. Noise (1m): ¡Ü45dB
16. Ambient temperature: -10¡æ~+50¡æ
17. Relative humidity: ¡Ü93%, 40¡À2¡æ, non condensation
18. Altitude: ¡Ü1000m
|
|
YNQ1205/YNQ1210/YNQ1215/YNQ1205A/YNQ1210A/YNQ1215A |
|
Main Characteristics:
1. Taking microprocessor as core, the serial sine wave inversion power supply achieves the full digitalized control of system
2. Reform the traditional SPWM technology to greatly minish switching loss and increase efficiency
3. Output wave form precision is high and system is stable, thus it is a kind of novel green power supply
4. Have functions of input confusion protection, input under-voltage protection, over-voltage protection, output overload/short circuit protection and overheating protection.
5. Power ranging from 200W to 1200W applies to household solar energy, wind electric power generation and other civil requirements
|
|
Main Technical Indexes
|
Product Name |
Inversion Power Supply |
|
Dimension and Weight |
|
|
Power Supply |
|
|
|
1. DC input rated capacity: 240/360/360/600VA
2. DC input rated voltage: 12/24VDC
3. DC input rated current: 20/30//15/25A
4. DC voltage allowable range of DC input: 10~14/19~29VDC
5. DC input no-load current: 0.5/0.75/0.38/0.63A
6. AC output rated power: 200/300/300/500W
7. AC output rated voltage and frequency: 220VAC 50Hz£©
8. AC output rated current: 0.9/1.36/1.36/2.73A
9. AC output voltage precision: 220¡À5%
10. AC output frequency precision: 50¡À2Hz
11. Output waveform distortion (50% of resitive load): ¡Ü5%
12. Dynamic response (Load 0¡û¡ú100%): ¡Ü5%
13. Power factor: ¡Ý0.8
14. Overload capacity: 150%, 10sec.
15. Peak factor: 3:1
16. iInversion efficiency £¨50% of resitive load): 80%/82%
17. Insulating strength (input and output): 1500VAC
18. Noise (1m): ¡Ü45/¡Ü55dB
19. Ambient temperature: -10¡æ~+50¡æ
20. Relative humidity: ¡Ü93%, 40¡À2¡æ, non condensation
21 Altitude: ¡Ü1000m
|
| |
|
